The tone generator has the ability to tone by pin, by pair, or all conductors at once. Toning helps to locate and identify a single cable that is within a bundle of cables. The tone generator has 4 user selectable tones. A built in analog tone generator is also included and can be used in all testing modes. The main remote is stored in the base of the tester when not in use. Coax cables are tested for opens and shorts on the pin and shield.įor all tests, the included main remote (Remote #1) is used to terminate the far end of the cable run. Testing is similar to the Data test, but tests up to 6 conductors instead of 8. In Voice mode, the RJ-11/12 port is active. Shield continuity can also be tested on shielded RJ-45 connectors and cables. Error types are also displayed on the LCD. Test results are displayed on the LCD in a pin-to-pin format. VDV can accurately identify and alert the user to uplink/crossover cables. When the test is activated, VDV checks each conductor of the cable for any opens (unterminated or cut conductors), shorts (cut or nicked conductors that come into contact), miswires (wires out of order – not consistent at both ends), reversals, or split pairs (wired correctly but using wrong conductor order and grouping). In Data mode, the RJ-45 port tests RJ-45 connector cables terminated to Cat 3/5/5e/6/6a twisted pair cables. The LCD visually displays “PASS” or “ERROR” after each test to verify if the cable is terminated correctly. The VDV can test Data/Ethernet RJ-45 (8P8C),Voice/Phone RJ-11/12(6P6C/6P4C) and Video/coax cables. The wiremap test visually shows, pin by pin, whether a cable is terminated properly at both ends, and if there is continuity from end to end. The primary function of the VDV is the wiremap test. The VDV is an LCD based all-in-one basic Voice-Data-Video tester for verifying proper wiring of low-voltage and data communications cables. This is an affordable kit that any installer of twisted pair or coax cable would use every day on the job.
#Test tone network kit plus
The 33-866 Test-Tone-Trace VDV kit combines two of our most popular testers - our 33-856 VDV Multimedia tester and the 62-164 Amplifier Probe plus several accessories in one kit designed to handle all of the basic testing and toning applications used by low voltage, video, and data communications installers. RJ-45 RJ-11/12 and Female F port interfaces.Designed for Cat 3/5/5e/6/6a cables RG59/6/ 6 Quad.Identifies errors by pin: shorts, opens, miswires, reversals, and split pairs.Voice/Data/Video LCD based wire mapper verifies cable continuity.Test cables, Tone cables, and Trace cables in one kit.Wire Cutters, Crimpers, Multi-Purpose Tools.
0 kommentar(er)
